ETV330C/515C SHEETER
Sheeter with a guillotine cutter suitable for cutting labels and heavy materials. In-line and off-line operation. Built-in register control. The sheeter is operated by a touch screen which allows for easy handling. Cutting according to lenght (metres/inches), number of labels or print marks. Conveyor belt with stack and total counter.
Features
- Touch display setting of label quantity per sheet and other job information.
- Cutting operations according to one of the following criteria:
- Label intervals by photocell.
- Length measured by an encoder (1/10 mm interval).
- Print mark by a print mark read or capacitive sensor (“clear on clear”). (Optional equipment).
- Unwind mandrel with separate motor.
- Conveyor belt with setting of sheets per stack and total number.
- Automatic register control adjusts for changes in the sheeter speed.
- Warning (and stop) when the unwinder is nearly empty.
- Automatic stop in case of unintentional operation of the unwind section.
- "Window detector” allowing for cutting jobs without register mark and for stop of the sheeter in case of missing label or matrix faults (1 lane).
- Suspension of cutting while unusuable paper runs through the sheeter.
- Switch-over from 1/10 mm to 1/100 inches when cutting by length.
- When the sheeter is switched off, all settings are preserved (battery backup).
- Switch-over to inline operation (optional equipment).
Technical specifications:
Cutting accuracy approx. ± 0,15 mm (»0.006²)
Max. web width 330/515 mm (»13.0²/20.3²)
Min. web width 30 mm (»1.8²)
Max. sheet length 9999 mm (»393.7²)
Min. sheet length 10 mm (»0.4²)
Unwind mandrel diameter (sleeves) 40 – 180 mm (»1.6 – 7.1”)
Max. unwind diameter (internal unwind section) 800 mm (»31.5²)
Max. roll weight, unwinding 150 kg
Max. web speed 30 mtr/min
The web speed is limited by max. 30 mtr/minute and max. 14,000
sheets/hour and varies consequently
according to the selected cutting length.